Handyman Connection Can Fix Your Running Toilet and Help You Save on Water Bills

A dripping faucet is annoying, but a running toilet? That’s money literally going down the drain. At Handyman Connection, we understand how frustrating it can be to hear that constant flow of liquid in your bathroom. Not only does it disrupt your peace of mind, but it also significantly impacts your water bills. If you’ve been wondering how to fix a running toilet to save water, you’re in the right place.

Many homeowners don’t realize that a running toilet can waste up to 200 gallons of water every day. That’s akin to taking 16 extra showers each month! Our team has assisted countless residents throughout Regina in identifying and solving these common plumbing problems, transforming wasteful fixtures into efficient ones that help reduce monthly utility expenses.

Why Running Toilets Drain Your Wallet

That innocent-sounding trickle from your toilet tank is more costly than you may think. When your toilet runs continuously, it’s not just an annoyance—it’s a significant waste of both water and money.

The Hidden Cost of Water Waste

A running toilet can waste between 4,000 and 6,000 gallons monthly. To put this in perspective:

• A running toilet can add $100 or more to your monthly utility bill
• Even slow leaks can waste 30 gallons or more per day
• Medium leaks (those that create a steady stream) waste approximately 250 gallons daily
• Severe leaks with water visibly flowing into the bowl can waste up to 4,000 gallons each day

One of our clients discovered her water bill had doubled over three months before realizing the culprit was a silent toilet leak. After our handyman services fixed her running toilet, her next bill showed immediate savings of over $60.

Environmental Impact of Water Waste

Water conservation is critical for an efficient local water system. Regina’s system delivers millions of gallons each day to homes and businesses. Every toilet that runs continuously strains the local infrastructure, making water conservation efforts vital. Moreover, reducing water waste also decreases the energy required to treat and pump water, which in turn lowers energy consumption and associated costs.

Common Causes of Running Toilets

Before you can fix a running toilet to save water, you need to understand the root causes. Here are the most common culprits we encounter during our handyman services for toilet repair:

Faulty Flapper Valves

The flapper is the rubber seal that lifts when you flush and then closes to keep water in the tank. Over time, these can degrade, warp, or become misaligned. When a flapper doesn’t create a proper seal:

1. Water continuously seeps from the tank into the bowl
2. The fill valve repeatedly activates to maintain the proper liquid level
3. Your water meter keeps running, even when no one is using it

Fill Valve Problems

The fill valve controls liquid flowing into the tank after flushing. Common issues include:

• Misadjusted float levels causing overflow into the overflow tube
• Worn-out valve components failing to shut off completely
• Debris or mineral buildup preventing proper operation

Chain or Handle Malfunctions

Sometimes the problem is mechanical:

• A chain that’s too short keeps the flapper from closing properly
• A chain that’s too long can get caught under the flapper
• A loose or sticking handle may not return to position after flushing

Cracked Overflow Tubes and Other Components

Physical damage to any toilet components can lead to leaks. Hard water can accelerate wear and tear on plastic and rubber parts, making regular inspection essential.

Reduce Water Bills with Toilet Repair

A running toilet can waste hundreds of gallons per day and cause your water bills to spike. Fortunately, most of these issues can be resolved quickly and effectively by the professional team at Handyman Connection. Here’s how we approach common running toilet problems and help homeowners save money and protect their plumbing systems.

Quick Diagnostic Steps

Before beginning any repairs, our technicians perform a thorough inspection to pinpoint the exact cause:

• Remove the tank lid and place it safely aside to prevent damage
• Flush the toilet to observe the internal mechanism in real time
• Check the water level to determine if it’s rising above the overflow tube
• Examine the flapper to see whether it’s sealing properly or allowing water to seep through
• Test the flapper manually—if pressing it down stops the flow, that usually confirms the issue

Fill Valve Adjustments

If the water level is too high, our professionals:

• Locate the adjustment screw or float clip on the fill valve
• Adjust the float mechanism to lower the water level
• Flush to confirm that the water now settles one inch below the top of the overflow tube

A correct water level is essential to prevent continuous drainage and reduce waste. We ensure proper calibration for long-term performance.

Flapper Valve Replacement

When the flapper is worn or no longer seals effectively, our team:

• Turns off the water supply to the toilet
• Flushes the tank to remove remaining water
• Detaches the flush chain and removes the old flapper
• Installs a new flapper suited to the toilet model and reconnects the chain with the correct tension
• Restores water flow and tests multiple flushes to ensure a perfect seal

Our professionals carry a wide variety of replacement flappers to ensure compatibility and performance.

When to Call Handyman Connection

Some toilet problems go beyond basic component issues. Call Handyman Connection for expert toilet repair if:

• The toilet continues running despite prior repairs
• There are leaks at the base of the toilet, not inside the tank
• You see visible cracks in the porcelain tank or bowl
• Water pressure appears abnormally low throughout the home
• Persistent problems return after multiple repairs

Advantages of Professional Toilet Repair

Choosing Handyman Connection means receiving:

• A full-system inspection to identify the root cause of the issue
• Professional-grade tools and top-quality replacement parts matched to your toilet’s specifications
• Preventive maintenance to catch minor problems before they become major repairs

Long-Term Value

Professional repairs deliver lasting benefits:

• Lower water and sewer bills over time
• Extended lifespan of toilet components due to reduced wear
• Prevention of damage from overflow, flooding, or mould
• Peace of mind knowing your plumbing is in expert hands

For trusted, efficient toilet repair, count on Handyman Connection to get the job done right—the first time.

Preventative Maintenance Tips

The smartest approach to toilet issues is preventing them before they start. Here’s how to keep your toilet operating efficiently:

Regular Inspection Routine

Develop a simple bathroom maintenance schedule:

1. Monthly visual check of tank components for wear or mineral buildup
2. Quarterly testing for silent leaks using food colouring (place a few drops in the tank and wait 15 minutes without flushing—colour in the bowl indicates a leak)
3. Clean components occasionally to remove mineral deposits, which can affect functionality.

Trust the Experts at Handyman Connection

For homeowners, addressing these issues promptly can prevent costly repairs and reduce water consumption. Handyman Connection is just a call away, ready to provide expert services and ensure your toilet runs efficiently. Contact Handyman Connection today to save water, reduce costs, and keep your plumbing systems in top shape.