Etobicoke Plumbing Services: How To Stop Your Toilet From Overflowing

How To Stop Your Toilet From Overflowing

When you have an overflowing toilet, you have to act fast so you can avoid serious water damage on the floor and ceiling below. Toilets can overflow when there is a clog and the water in the bowl fills up too much. You can avoid disaster if you know exactly what to do when your toilet is having a problem. For a serious clog or another issue, you can count on Handyman Connection for plumbing services in Etobicoke to help you avoid any bathroom catastrophes.

Quickly Remove the Lid

Whenever using the toilet, make sure you know when there is a potential problem. If the toilet isn’t flushing all the way, that may be the first clue it could start to overflow. It’s vital to move quickly so the water doesn’t start overflowing and flooding your room. First, immediately remove the toilet’s lid so you can prevent big problems.

Push Down on the Flapper

Once you take the toilet lid off, look for a piece inside called the flapper. The flapper rests at the bottom of the toilet tank. You’ll need to reach inside of the toilet top and push down on the rubber flapper to make sure you stop the flow of water. The water up inside of the toilet top is clean, so no need to put on gloves or worry about touching the contents you’re trying to flush.

Lift the Float

Next, you need to find the float inside of the toilet top. The float sits at the top of this part of the commode. This light piece of plastic floats on the highest part of the water level inside of the top. If you lift up the float, this will stop any water from continuing to fill up inside of the toilet and flood the bowl and room.

Turn Off the Water Supply

If you’re still having trouble with water filling up your toilet, the next step is to turn off the water supply to the toilet. There should be a valve located on the wall behind the toilet that controls the toilet’s water. Turn the valve tightly to the right to shut it off. This can prevent any additional water from seeping down into rooms below the bathroom and avoid the need for kitchen renovations or other repairs.

Plunge the Toilet

Next, you will have to determine what caused the toilet to clog or start to overflow. Use a plunger to help clear the clog and get your toilet running back to normal. You’ll need to keep the plunger below the water level in the toilet and use some force to get the clog cleared.

Check Other Toilets and Sinks

If you’re still having trouble with the toilet not flushing, it’s time to check other toilets and sinks for problems. Sometimes a clog in a toilet may be a sign of a plumbing issue throughout the entire house. For this type of situation, you’ll need help from the pros at Handyman Connection. There could be an issue with your septic field or tank or the problem may be with your entire drain system.

Fast Plumbing Services in Etobicoke

Plumbing disasters and floods can be stressful if you don’t have a reliable pro at your side. Our team offers fast plumbing service to homeowners so you can avoid a serious flood in your space. We can also look at your entire plumbing system and repair any issues that are causing toilets to drain slowly and clog on a consistent basis.

When you have a plumbing problem, contact the pros at Handyman Connection. We can help repair or replace plumbing fixtures and give you advice about how to prevent clogged toilets.