Regina Carpentry Services: 4 Common Cabinet Installation Mistakes

It is easy to make mistakes when installing cabinets if you don’t know what you are doing. Installation mistakes can affect the functionality of your cabinets as well as their aesthetics. You may have to hire a carpenter in Regina to fix your mistakes anyway; therefore, having the job done professionally from the outset can save you money in the long run. Here are some common mistakes that often result from DIY cabinet installation.

1. Offset or Unleveled Installation

Even small imperfections in the cabinets’ alignment can cause large visual discrepancies. If a cabinet is slightly off-center or tilted — especially in relation to the other features of the room, such as windows — the eye is drawn right to them. Nevertheless, it is difficult to get the cabinets perfectly level, especially if the floors and walls are old.

2. Inaccurate Measurements

The biggest cause of delays in a kitchen remodelling project is measurements that are inaccurate. You need to measure from wall to wall and from floor to ceiling. You also have to account for doorways or windows in your measurements because these could affect the cabinetry’s alignment. In some cases, they could also cause further complications by breaking up the cabinetry, making accurate measurements even more important. Inaccurate measurements could lead to cabinets that are installed too high or too low, or that do not fit the space correctly.

3. Improper Lighting Plan

Cabinets are typically installed over the food preparation area. While this can be convenient, it can also cause the cabinets to cast shadows, making it more difficult to see what you are doing while you are preparing a meal. Under-cabinet lighting can help to solve this problem, but it is preferable to start laying the groundwork for this before cabinet installation is complete. It is possible to retroactively install the lighting after the cabinets are up, but it is more difficult, which translates to greater expense.

4. Doors That Interfere With One Another

It may not be too difficult to install cabinets that look fine when the doors are closed. However, if you do not check first to make sure that the doors swing in the right direction and do not interfere with each other, you may find that your cabinets are not functional, however beautiful they may appear.

Furthermore, you not only have to check that your cabinet doors do not interfere with one another; you also have to make sure that they do not interfere with the doors of appliances, such as the stove, refrigerator, or dishwasher. You could render these appliances unusable if the handles of the cabinets prevent them from opening.

5. Mismatched Spacers

One way to prevent the problem of cabinet doors that interfere with other appliances is to install spacers to make sure that the handles have enough clearance. Spacers can also help extend the cabinet face by acting as fillers. If you purchase finished cabinets, the spacers should be included and all ready to go. However, if you purchase unfinished cabinets, the spacers may not be included. This means that you have to find your own slats of wood to use as spacers and you have to stain them the same colour as your cabinets. The spacers will still work if they are not stained the right colour, but they’ll make the cabinets look shoddy.

6. Inadequate Hardware

Cabinet hardware includes the components that you see, such as pulls, knobs, and handles. It also includes components that you are not supposed to see, such as the fasteners that attach the cabinets to the walls, as well as hardware that is visible but not a focal point, including the hinges. You need these components in the correct number, and they also need to be the right size.

Hire a Carpenter in Regina From Handyman Connection

We perform repair services in Regina as well as installation. Find out about our carpentry specialties.