The Importance of Sanding Drywall In Your Brantford Home

Most homes have interior walls that are made of drywall. When you’re in the process of turning your house into a home, you probably want to paint or install tile on the drywall to give each room some personality. Regardless of whether you prefer to paint or tile, your drywall must be installed correctly for a smooth finish. If there are any blemishes in the drywall, they will be visible in any paint job or prevent tiles from sticking correctly. One of the most important steps for finishing drywall correctly is sanding. Here’s why sanding is so important for a proper finish.

Why Is Sanding Important?

There are several steps involved in properly finishing drywall. You may think that sanding drywall isn’t important if there are no obvious blemishes in the material, but you still need to take the time to sand it. There may be imperfections that aren’t visible until you have applied a coat of paint, and once the paint has dried, it’s too late to fix the error without refinishing the entire wall. You should make the effort to sand the drywall, and there are two methods to choose from.

What Is Dry Sanding?

Dry sanding is the most common method of finishing drywall. While you can use a small piece of sandpaper for obvious blemishes that don’t affect the entire wall, it’s best to use a large sander to prepare the entire wall. The process requires you to apply even pressure to the tool and move it in small circular motions across the wall.

While this method is effective, it is also messy. Dry sanding leaves behind a lot of dust, and if you don’t have the area contained, the dust will cover every surface near your project. However, this method can only be done when the joint compound is completely dry. You could damage the drywall if you try to use a sander on the material before it is dry. You also have to be cautious of scratching your drywall by putting uneven pressure on the drywall.

What Is Wet Sanding?

Wet sanding is the method used when the drywall material has not dried completely. Some people prefer this method because it doesn’t create dust and leaves no mess, but the finished result is less smooth than that of dry sanding because it uses a sponge rather than a sander. Wet sanding is the best method if you want to apply a lot of texture to your wall.

If you plan on placing tile on your wall, wet sanding is a great choice. You’ll have no mess to clean up and don’t have to wait for the drywall to finish drying before you can start sanding. However, the heavy texture provided by this sanding method means that it isn’t suitable for walls you plan to paint. No paint will glide smoothly onto drywall that has been wet sanded, so you need to know which finish you want before you can determine which type of sanding is right for your project. Regardless of which method you choose to use, it is best to hire a professional if you want to be sure that you are satisfied with the result.

Sanding drywall properly is a tedious and time-consuming project. If you want to save time and know that you will be pleased with the final result, it is best to hire a professional with the knowledge and experience needed to prepare your drywall for your preferred finish. The expert craftsmen at Handyman Connection are here to help with home repairs. If you are looking for drywall services in Brantford, we can prepare the interior services of your home for either paint or tile finishes. Contact us today to schedule an appointment for an estimate.