5 Things To Consider Before Installing Recessed Lighting In Brantford

Recessed lighting is among the most popular additions to home lighting that people choose, thanks to its streamlined look. However, there is more to recessed or can lighting than just the satisfaction of smoothing your ceiling’s sightline. Find out what you need to know before settling on recessed lighting for your home and why the process is made simpler by calling a professional electrician in Brantford for installation.

Identify What Specifically You Want To Light

Recessed lighting can pull off multiple layers of lighting, but it is essential to identify precise use before making any purchases. Specific fixtures, bulbs, and fittings are meant for different areas and purposes. While recessed lighting can be very versatile, common uses for the installations include:

• General or ambient lighting for washing whole rooms with light
• Task lighting for highlighting reading areas or components necessary for the operation
• Accent lighting for paintings, pictures, or vignettes in a larger area

Remember That Professional Installation Is Best

Professional electricians will help you design and choose the necessary components of the lighting scheme that you want to create. If you are looking for a recessed lighting installation that replaces overhead lights in your living room, you will likely need dimmable recessed lighting with several cans and bulbs. Alternately, if your idea is to illuminate an antique oil painting, an electrician will probably guide you to a recessed spotlight.

Not only do professional electricians provide help on design and the necessary materials for your specific job, but they are specifically trained for wiring, installation, and electrical repair services. Electricians spend many years in school and hundreds of hours of on-the-job training on becoming certified electricians.

Why Expertise Matters

Recessed installation is a multi-step process. Depending on if you have a new build or an older home, it will involve different steps. Electricians also have to consider if there’s an additional floor above or an unfinished space nest to the install; the proper housing will depend on the answer.

Parts

New construction housing will be used for recessed lighting installation if your home is not that old. If your home is older and it is not possible to get far enough inside or above the ceiling to run safe wiring, the answer is to remodel fixtures instead.

Fixtures

Fixtures can range in size, generally anywhere from four inches to eight inches in diameter. The most common choice is six-inch fixtures, and as a result, there will be more options to choose from in that size.

Fittings

Fittings come in two different versions, and some offer both ratings. Professional electricians will identify your need for Insulation Compatible fittings or Air Tight fittings. AT and IC ratings are necessary for attics to provide the most appropriate and energy-efficient fit. IC fittings are typically used when there is a floor or other finished area above or beside the site where the lighting is being installed. AT fittings must be used when housings are installed with an unfinished room or attic space butting against the installation so that heating and cooling do not escape.

Wiring

Hiring a professional electrician is well worth it if you get frustrated with untangling all your charger cords. Wiring is complicated and may need to be replaced if old or faulty. Further, assessing the lighting circuits is necessary to ensure that you will not exceed the maximum number of fixtures on one circuit.

Bulbs

Expertise also takes a lot of the guesswork out of which bulbs to choose for your recessed install. Professional electricians will help you identify the look, projection, tone, and warmth that matches the bulb ideal for your space. Popular options to choose from include:

• Incandescent
• Halogen
• Fluorescent
• LED

Contact the professional electricians at Handyman Connection in Brantford for expertise and installation of your recessed lighting project.

*All electrical work is subcontracted to ECRA/ESA Licensed Electrical Contractors